Skip to content

Bathroom mirror or mirrored cabinet? Three ways to plan above the basin

There’s more to choosing a bathroom mirror than matching it to the width of the basin. A shallow mirror can leave more room over the tap, while a cabinet can clear the basin ledge. If you want integrated lighting, it’s also worth deciding how you’ll power it before the wall is finished. These three options from FMV Tiles & Bathrooms suit different layouts.

Radius for a round mirror with a demister

Radius round LED mirror

The Radius measures 600 × 600 × 30 mm. It has integrated LED lighting, a sensor switch and a demister pad. Press and hold the on/off control to change the lighting from white to warm. At 30 mm deep, it projects much less from the wall than the Opacus cabinet.

If your basin sits close to a side wall, mark out a 600 mm circle with paper or masking tape. Check how much space the curve leaves beside wall lights or a shelf, and where the widest part of the glass sits at eye level.

View the Radius round LED mirror

Atlanta for battery-operated LED lighting

Atlanta battery-operated LED mirror

The Atlanta is available in 500 × 700 mm and 600 × 700 mm sizes, both with integrated LEDs. It takes three AAA batteries, supplied separately, and the listing confirms that rechargeable batteries are suitable.

Both versions give you the same mirror height, so choose the width around nearby fittings. The 500 mm version leaves an extra 50 mm on each side compared with the 600 mm version when both are centred over the basin. Before fixing the mirror, check how you’ll reach the battery compartment.

View the Atlanta battery-operated LED mirror

Opacus when you need storage above the basin

Opacus mirrored cabinet

The Opacus measures 400 × 500 × 140 mm and has aluminium sides and a single soft-close mirrored door. It also includes LED light strips, a demister pad, a sensor switch and a shaver socket.

It’s the narrowest of these three products, but its cabinet projects 140 mm from the wall. That can give you a place for everyday toiletries and free up the basin ledge. Check the door swing against nearby fittings and make sure the cabinet gives you enough room to lean towards the basin.

View the Opacus mirrored cabinet

Mark out the space before you order

Measure the usable wall above the basin after allowing for the tap, splashback and any nearby lights. Mark the outline at the height you plan to mount it, then stand where you normally use the basin. Check the view at eye level as well as the space around the edges. Ask your installer to confirm the fixing, electrical requirements and suitability for the intended position before fitting.

Previous Post Next Post
Welcome to our store
Welcome to our store
Welcome to our store