Skip to content

Which Quadro basin tap fits your basin?

The three chrome Quadro basin mixers share the same single-lever design. The differences matter at the basin: where the tap mounts, how far the spout needs to reach and how much clearance you need above the rim. Start with the shape of your basin and the position of its tap hole.

Mini mixer for a small cloakroom basin

Quadro Monobloc Mini Basin Mixer in chrome

The Quadro Mini is designed for smaller basins. Start here if your cloakroom basin has a single tap hole and a shallow bowl. Check the distance from the centre of the tap hole to the part of the bowl you want the water to reach. On an offset basin, measure from the actual tap hole because the tap may sit to one side.

Check clearance behind and above the lever, especially if the basin sits close to a tiled splashback or under a shelf. There should be room to move the lever through its full range.

View the Quadro Monobloc Mini Basin Mixer (S7007383)

Standard mixer for a basin with one tap hole

Quadro Monobloc Basin Mixer in chrome

The standard Quadro Monobloc is the one to compare for a bathroom basin with a single tap hole on the deck. It brings hot and cold water through one spout, with a single lever to control the flow and temperature.

Measure both spout reach and height. The outlet should sit far enough over the bowl to give you room to wash your hands. If the basin already has a tap you find comfortable, use its outlet position as a reference.

View the Quadro Monobloc Basin Mixer (S7007335)

High-rise mixer for a countertop bowl

Quadro High Rise Monobloc Basin Mixer in chrome

The Quadro High Rise is listed for countertop basins with no tap hole. It mounts on the worktop beside or behind the bowl, so the position of the worktop hole determines how far the spout reaches into the basin.

Measure the rim height from the finished worktop and check the tap’s spout outlet height against it. Then check that the spout reaches past the rim and into the bowl. Set the basin and tap positions together before the worktop is drilled.

View the Quadro High Rise Monobloc Basin Mixer (S7007336)

Check the pressure and waste before ordering

FMV lists a chrome finish, ceramic disc operation, a minimum operating pressure of 0.2 bar and an included clicker waste for all three models. Ask your plumber to check the available pressure at the tap and confirm that the waste suits the basin’s overflow arrangement. If you need exact spout dimensions, confirm them for the model you’re considering before ordering.

Previous Post Next Post
Welcome to our store
Welcome to our store
Welcome to our store