Skip to content

Wood-effect tiles for kitchens and hallways

If you’re choosing a wood-effect floor, start with the plank length. A 600 mm plank gives a herringbone pattern a tighter rhythm, while a 1,200 mm plank creates longer lines through a room. Here are three formats from FMV Tiles & Bathrooms and where each can work well.

Aspen Wood Gris for a herringbone hallway

Aspen Wood tiles from the FMV product gallery
Aspen Wood range

Aspen Wood Gris is a 200 × 600 mm matt ceramic tile, 8 mm thick and listed for walls and floors. Its shorter plank makes it the first of these three to consider if you want herringbone in an entrance hall. The pattern gives the floor some detail even when much of it is framed by doorways, a runner or a console table.

Before settling on the layout, ask your tiler to mark out the pattern from the front door. Shifting the starting line can make the cuts along the skirting more balanced and change which part of the pattern you see as you walk in.

View Aspen Wood Gris (NB16034)

Wood Space Walnut for a kitchen with painted units

Wood Space tiles from the FMV product gallery
Wood Space range

Wood Space Walnut Natural is a 202 × 802 mm matt porcelain tile, 8.2 mm thick and listed for walls and floors. The range has variation in tone across the planks. Walnut is worth comparing with your cabinet sample if you want a deeper wood tone alongside painted units.

In a galley kitchen, try laying out the planks in both directions before deciding. Lengthways draws your eye towards the far end. Across the room brings attention to the width between the units. Check where the joints meet the doorway and where the first full tile will sit in front of the cabinets.

View Wood Space Walnut Natural (NB17662)

Honey Wood Noce for a longer, quieter layout

Honey Wood tiles from the FMV product gallery
Honey Wood range

Honey Wood Noce is a 200 × 1,200 mm rectified porcelain plank with a natural finish. It is 8.8 mm thick and listed for walls and floors. At roughly the same width as Aspen Wood, it’s twice the length. That means fewer end joints along a straight run, which can suit a kitchen that opens into a dining area.

Check the layout around the end of an island or where the kitchen opens into the next room. Those are places where a narrow cut can catch the eye. A dry layout gives your tiler a chance to adjust the starting point before fixing the tiles.

View Honey Wood Noce (NB18220)

Compare samples in the room

Put your shortlisted samples flat on the floor next to the skirting or a cabinet door. Look at them in daylight and again with the lights you use in the evening. Compare a grout colour close to the tile with one that gives the joints more definition. If you’re choosing for a wet entrance or another area where grip matters, check the slip suitability of the exact variant before ordering.

Previous Post Next Post
Welcome to our store
Welcome to our store
Welcome to our store